Celma

Motors according to the NEMA requirements

 

General purpose motors, adapted for DOL start or for Part Winding Starting.

Motors made according to the NEMA, CSA and EPACT requirements.
 

CATALOGUE VERSION:
> with parameters according to Design B

   or/and Design C,
> operating duty S1,
> rated voltage 230V/460V for rated output up to 125HP and  460V for rated output above 125HP,
> 12 leads from the stators winding,
   (6 leads for the 575V motors)
> frequency 60Hz,
> insulation class F,
> ambient temperature -30°C do +40°C,
> height of installation above sea level up to 1000m
> terminal box on the left side,
> with one or two threaded cable inlets according to USAS B2.1-1968
> rolling bearings on both sides:  63.. series with grease refilling

OPTIONAL VERSIONS:
> other rated voltage or frequency,
> roller bearings NU on D-side,
> terminal box on the right side,
> other non catalogue versions according to the customer’s requirements



symbol rated output [HP] synchronous speed [rpm] frequency [Hz] rated voltage 1 [V] current at rated voltage 1 [A] motor weight (rigid base) [Lbs]
STe 324TS 40 3600 50 460 45.6 538
STe 326TS 50 3600 60 460 55 604
STe 364TS 60 3600 60 460 66.5 730
STe 365TS 75 3600 60 460 83.5 780
STe 405TS 100 3600 60 460 108 976
STe 444TS 125 3600 60 460 135 1327
STe 445TS 150 3600 60 460 160 1407
STe 447TSA 200 3600 60 460 213 1675
STe 324T4 40 1800 60 460 46.5 558
STe 326T4 50 1800 60 460 57 640
STe 364T4 60 1800 60 460 67.5 734
STe 365T4 75 1800 60 460 84.5 794
STe 405T4 100 1800 60 460 109 1027
STe 444T4 125 1800 60 460 136 1387
STe 445T4 150 1800 60 460 162 1466
STe 447T4A 200 1800 60 460 227 1755
STe 324T6 25 1200 60 460 30.5 534
STe 326T6 30 1200 60 460 37.0 562
Cantoni MotorBeselInduktaCelmaEmitEma-ElfaFanaFormitNarmodFenes