Electrohydraulic Releases ZE-220-DIN (according to DIN 15430)
Operation of the release consists in advance of the piston rod with appropriate force and to speciﬁc stroke. The release ﬁnds application mainly in brakes for releasing (opening) shoe and also disk brakes. With built-in spring, it not only releases the brake but also generates braking torque. The release can be used for all applications requiring to-and-fro movement, e.g. to actuate gates and valves, to open and close ﬂaps and doors, to raise and lower barriers and also to move levers and pull-rods.
Oznaczenie wersji zwalniaków
ZE 220-50/1-DIN - zwalniak z płytą kołnierzową
ZE 220-50/2-DIN - zwalniak w wersji podstawowej
ZE 220-50/3-DIN - zwalniak z podstawą mocującą
Normal (standard) N/1 – for utilization in open air in temperate climate.
Protection rating IP 65 (PN-EN 60529:2003).
The release in the standard version is intended for operation in upright position and at 30° angle.
-25 °C to +40 °C (electro-insulating transformer oil)
-40 °C to +50 °C (silicone oil – DOW CORNING Fluid 200 10 cSt)